Price Schedule Spring 2010

Windsurfers, Kite boards and such 

Analysis re water content, structural integrity free
Water evacuation (vacuum - re-bag every day to monitor, cont dehydrator drying during off-hours) $10.- set-up, $5.-/day, $50.- max
Install vent plug (retro-style w/ flange, please specify handled or slotted screw) $10.-
Cosmetic, non-structural ding (putty, fair, prime, paint, rub out, non-skid as indicated) $35.- first ding
          for additional cosmetic dings $20.-/each
Basic structural ding (glass, fair, prime, paint, rub out, non-skid as indicated) $50.- first ding
          for additional structural dings $35.-/piece
          where Divinycell needs to be replaced        add $15.-/each
          where padz are involved        add $20.-
          for decals and/or graphics in way of repair        add $10.-
Nose buckle/crack/dislocation up to 1ft aft of tip $75.-
          for wide style boards        add $25.-
Remove and replace fin box (US style) $120.-
          Powerbox, Tuttlebox, Meritex etc $150.-
          Deep Tuttlebox $180.-
          where padz are involved        add $20.-
Remove and replace standard 7" or 10" mast box $120.-
          for Carbon deck        add $25.-
Install partial stringers to stabilize mast box installations $90.-
          for Carbon decks        add $20.-
Remove and replace foot strap inserts $25.-/each (NOT pair!!)
          where padz are involved        add $20.-/pad
Major structural repairs quotation - $65.-/hr
Re-Dek (strip old non-skid, do minor touch-up, apply UV-resistant Epoxy, mist on Acrylic dust) $75.-

 

Sandwich Epoxy Surfboards, SUPs
Cosmetic, non-structural ding (putty, fair, prime, paint, or clear-coat as indicated, polish) $35.- first ding
          for additional cosmetic dings $20.-/each
Basic structural ding (glass, fair, prime, paint, polish, touch up pinstripes as needed) $50.- first ding
          for additional structural dings $35.-/each
          where Divinycell needs to be replaced        add $15.-/each
          for decals and/or graphics in way of repair        add $10.-/each
Cosmetic ding in wood veneer board (grind, glass, clear-coat & polish) $35.-
          for additional cosmetic dings in wood veneer board $20.-/each
Structural ding in wood veneer board (repl inner glass, vacuum-bag new veneer, glass over etc) $75.- first ding
          for additional structural wood veneer dings $45.-/each
Gloss cracks in wood veneer board (grind, glass, clear-coat & polish) $15.-/linear foot
Remove and replace Standard fin box incl minor bottom repair $120.-
Remove & replace thruster box $65.-
Remove and replace FCS insert $55.- for one
          remove and replace FCS inserts $70.-/ pair same fin
Install carry handle (inst, glass over & refinish) $75.-
          where padz are involved         add $30.-

Other small craft repairs will be quoted